Marineland Magnum 350 Manuel du propriétaire Page 6

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 12
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 5
STEP 1: MEASURE AND CUT HOSES,
INSTALL HOSE RETAINER BANDS
Measure and cut hose into two pieces of equal
length (fold in half and cut at crease with scissors).
Using the Hose Retainer Band Installer provided,
roll a Hose Retainer Band over one end of each
hose and back at least 2” from end (Figure 8).
STEP 2: CONNECT MAGNUM HOSES TO MAGNUM COVER AND SECURE
Before you begin: If you are choosing to install Quick Disconnect Valves, first
install hoses (as directed below), then install Valves in accordance with separate
directions on page 17.
Moisten ends of hoses with hot
water or apply a very light coating
of Silicon Lubricant (included) to
ensure easier installation. Push
hoses over barbs on Intake and
Outlet Ports of Magnum Cover
(Figure 9a). Apply firm, even
pressure...undue stress can crack
port on Cover and result in leak-
age. Hose ends should touch cover.
Roll Hose Retainer Bands into place (Figure 9b).
8
9
STEP 6: POSITION MOTOR AND CANISTER
Apply self-adhesive Rubber Foot Pads to
the underside of the Motor Assembly
and extendible Stabilizer Legs in
depressions provided. Slide legs into
position on underside of Motor Housing
and extend as desired for stability
(Figure 6).
Place unit (Canister with Motor
Assembly) in well-ventilated, but
accessible location with top of Canister
Filter below aquarium water level
(Figure 7). If desired, a waterproof
sheet may be placed under Magnum
for additional protection. Keep Canister
Cover in place to ensure accurate
measurement of hose length prior to
installation. DO NOT PLUG IN.
Figure 6
Stabilizer
Legs
Motor
Assembly
Foot Pads (underside
of Stabilizer Leg)
CONNECTION
Hose
Retainer Band
Intake
Port
Magnum Cover
Figure 9bFigure 9a
Figure 7
Note:Top of
Canister must be
below water level.
Aquarium
Canister Cover
Canister
Filter
Figure 8
Hose
Retainer
Band
Roll hose
retainer
bands 2”
from end
Outlet
Port
2”
Vue de la page 5
1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire